Manual gas valve - This option is only available on natural gas.  It is a manual gas valve where you use a match to light the fire.  You can adjust the flame height for your personal preference.   This option can only be used if a safety pilot is not required by your local code, if you are unsure of your code, we suggest the safety pilot option.


 

Safety pilot - This option is available on both natural and propane (LP) gas.  The CPE-PO manual safety pilot kit allows for complete flame height control at the fireplace.  It has a knob to adjust the flame height for your personal preference.  The CPE-PO is easy to install, uses no electricity, has heat shielding for greater protection, and includes a built-in safety feature which shuts off gas flow should pilot flame go out. For use on all Hargrove gas log sets.

On/Off Remote Control - This option is available on both natural and propane (LP) gas. The Latch-Tap Remote safety pilot system is similar in appearance to the Safety Pilot Control (shown here with heat shield removed), but adds an on/off remote control unit to this low profile, high-temperature valve. It includes the remote control.  With this gas valve, you can turn the flame on and off by the included remote control or at the fireplace.  You can set the flame height to your personal preference at the fireplace.

Send mail to Sales@FireLogs.com with comments about this web site.
Copyright © 1997 www.FireLogs.com
Last modified: July 14, 2010